RFID NFC Epoxy Tag

nfc epoxy tag
NFC Epoxy Tag RFID transponders are constructed for optimal performance under harsh conditions. They are resistant to fuels, mineral oils, petroleum and salt mist. They repel moisture – even in high temperature, high pressure washes.

Unrelenting performance despite temperature fluctuations allows Epoxy Tag transponders to adapt to demanding applications. These tags can tolerate repeated autoclaving in medical applications, and plastic injection molding processes for permanent embedding into industrial components, equipment or containers.

Cards-Mart can provide epoxy tags in several different frequencies LF 125 and HF 13.56 MHz.  In the near future we will also be bringing out UHF Gen 2 epoxy tags based on demand.

Frequently Used Chips:

NTAG213, NTAG215, NTAG216 ,MIFARE Classic®, MIFARE Ultralight ®, MIFARE® DESFire®, MIFARE Plus®

1. Specification: 

Material: Epoxy coated

Size: 30mm diameter ,40*25mm or as request

Protocol: ISO 14443A/ ISO15693

Chip and Memory: NTAG213, NTAG215, NTAG216 ,MIFARE Classic®, MIFARE Ultralight ®, MIFARE® DESFire®, MIFARE Plus®

Frequency: 13.56 MHZ

Reading range: Max 10cm (depends on the card reader and antenna)

Date transfer Rate: 106kbit/s

Read/Write Endurance: 100000 time

 2. Work Environment

Normal operation:-25 ~50 degrees

Store humidity: 20%-90%

Operation temperature: -40~65 degrees

 3. Craft

Four color off-set printing, Thermal Number,Digital Number ,punching ,UV Coating ,epoxy coating etc

Request Free Quote

1 + 2 = ?